应用光学, 2020, 41 (5): 1129, 网络出版: 2021-06-25   

基于拉锥光纤布拉格光栅的法布里-珀罗应变传感器的仿真研究

Simulation of Fabry-Perot strain sensor based on tapered fiber Bragg grating
作者单位
1 上海理工大学 理学院,上海 200093
2 上海理工大学 上海市现代光学重点实验室,上海 200093
摘要
为解决干涉型光纤应变传感器自由光谱范围较小或干涉条纹精细度较低等问题,提出了一种基于单拉锥光纤布拉格光栅的法布里-珀罗腔的应变传感结构及其改进方案。利用啁啾光纤布拉格光栅不同位置反射不同波长的特性,形成腔长随波长连续变化的法布里-珀罗腔,得到了无穷大的自由光谱范围且谐振谷精细度高。数值计算结果表明,应变传感灵敏度与拉锥光纤的腰区直径和栅区长度正相关。在0~300 με范围内,当腰区直径为光纤直径的3/25,栅区长度为30 mm时,应变传感灵敏度为7.05 pm/με。该结果对其他干涉型传感结构的设计具有一定的参考价值。
Abstract
In order to solve the problems of small free spectrum range or low interference fringe fineness, a strain sensing structure and its improved scheme of Fabry-Perot cavity based on single tapered fiber Bragg grating was proposed. By utilizing the characteristic of reflecting different wavelengths at different positions of the chirped fiber Bragg grating, the Fabry-Perot cavity was formed with a continuous variation of cavity length with wavelength, and the infinitely-great free spectrum range as well as the high resonance valley fineness was obtained. Numerical results show that the strain sensing sensitivity is positively related with the lumbar region diameter and grating region length of tapered fiber. In the range of 0~300 με, the strain sensing sensitivity is obtained to be 7.05 pm/με when the lumbar region diameter is 3/25 of the fiber diameter and the grating region length is 30 mm. The results have some reference value for the design of other interferometric sensing structures.

郝子鉴, 卜胜利, 李用希, 李迪辉, 韩仲学. 基于拉锥光纤布拉格光栅的法布里-珀罗应变传感器的仿真研究[J]. 应用光学, 2020, 41(5): 1129. Zijian HAO, Shengli PU, Yongxi LI, Dihui LI, Zhongxue HAN. Simulation of Fabry-Perot strain sensor based on tapered fiber Bragg grating[J]. Journal of Applied Optics, 2020, 41(5): 1129.

本文已被 1 篇论文引用
被引统计数据来源于中国光学期刊网
引用该论文: TXT   |   EndNote

相关论文

加载中...

关于本站 Cookie 的使用提示

中国光学期刊网使用基于 cookie 的技术来更好地为您提供各项服务,点击此处了解我们的隐私策略。 如您需继续使用本网站,请您授权我们使用本地 cookie 来保存部分信息。
全站搜索
您最值得信赖的光电行业旗舰网络服务平台!