工程陶瓷凹槽型表面微织构激光制备工艺研究
[1] RAEYMAEKERS B, ETSION I, TALKE F E.Enhancing tribological performance of the magnetic tape/guide interface by laser surface texturing[J].Tribology Letters, 2007, 27(1): 89.
[2] ETSION I, HALPERIN G, BRIZMER V, et al. Experimental investigation of laser surface textured parallel thrust bearings[J].Tribology Letters, 2004, 17(2): 295-300.
[3] BRIZMER V, KLIGERMAN Y, ETSION I.A laser surface textured parallel thrust bearing[J].A S L E Transactions, 2003, 46(3): 397-403.
[4] BULATOV V P, KRASNY V A, SCHNEIDER Y G.Basics of machining methods to yield wear- and fretting-resistive surfaces, having regular roughness patterns[J].Wear, 1997, 208(1-2): 132-137.
[5] SCHNEIDER Y G.Formation of surfaces with uniform micropatterns on precision machine and instruments parts[J].Precision Engineering, 1984, 6(4): 219-225.
[6] PETTERSSON U, JACOBSON S.Tribological texturing of steel surfaces with a novel diamond embosTing tool technique[J].Tribology International, 2006, 39(7): 695-700.
[7] STEPHENS L S, SIRIPURAM R, HAYDEN M, et al.Deterministic micro asperities on bearings and seals using a modified LIGA process[J].Journal of Engineering for Gas Turbines & Power, 2004, 126(1): 573-580.
[8] WANG X, KATO K, ADACHI K, et al.Loads carrying capacity map for the surface texture design of SiC thrust bearing sliding in water[J].Tribology International, 2003, 36(3): 189-197.
[9] WANG X, KATO K.Improving the anti-seizure ability of SiC seal in water with RIE texturing[J].Tribology Letters, 2003, 14(4): 275-280.
[10] WANG X, KATO K, ADACHI K. The lubrication effect of micro-pits on parallel sliding faces of SiC in water[J].ASLE Transactions, 2002, 45(3): 294-301.
[11] UEHARA Y, WAKUDA M, YAMAUCHI Y, et al.Tribological properties of dimpled silicon nitride under oil lubrication[J].Journal of the European Ceramic Society, 2004, 24(2): 369-373.
[12] 张培耘, 华希俊, 符永宏, 等.激光表面微织构工艺试验及应用研究[J].表面技术, 2013, 42(5): 55-58.
ZHANG PEIYUN, HUA XIJUN, FU YONGHONG, et al.Experimental study and application of laser surface micro texturing[J].Surface Technology, 2013, 42(5): 55-58.
[13] 周玉.陶瓷材料学[M].北京: 科学出版社, 2004.
ZHOU YU.Ceramic materials science[M].Beijing: Science Press, 2004.
[14] 李宝玉.激光织构化轴承的润滑特性研究[D].广州: 广东工业大学, 2015.
LI BAOYU.Study on lubrication characteristics of laser textured bearings[D].Guangzhou: Guangdong University of Technology, 2015.
[15] 李德鑫, 张文武, 邓益民, 等.SIC机械密封环激光表面微织构的工艺优化[J].激光杂志, 2015, 36(12): 92-96.
LI DEXING, ZHANG WENWU, DENG YIMING, et al.Technological optimization of laser surface texturing of SIC mechanical seal rings[J].Journal of Lasers, 2015, 36(12): 92-96.
[16] 张保国, 田欣利, 佘安英, 等.工程陶瓷材料激光加工原理及应用研究进展[J].现代制造工程, 2012(10): 5-10.
ZHANG BAOGUO, TIAN XINGLI, SHE ANYING, et al.Research progress of laser processing principle and application of engineering ceramic materials[J].Modern Manufacturing Engineering, 2012(10): 5-10.
[17] 吴雪峰.激光加热辅助切削氮化硅陶瓷技术的基础研究[D].哈尔滨: 哈尔滨工业大学, 2011.
WU XUEFENG.Basic research on laser assisted cutting silicon nitride ceramic technology [D].Harbin: Harbin Institute of Technology, 2011.
[18] 刘泽宇, 魏昕, 谢小柱, 等.激光加工表面微织构对陶瓷刀具摩擦磨损性能的影响[J].表面技术, 2015(10): 33-39.
LIU ZHEYU, WEI XING, XIE XIAOZHU, et al.Effects of laser surface texturing on friction and wear properties of Ceramic Cutters [J].Surface Technology, 2015(10): 33-39.
张正, 陈晓晓, 李德鑫, 张文武, 于爱兵. 工程陶瓷凹槽型表面微织构激光制备工艺研究[J]. 应用激光, 2018, 38(1): 64. Zhang Zheng, Chen Xiaoxiao, Li Dexin, Zhang Wenwu, Yu Aibing. Study on Laser Preparation of Groove Surface Micro Texture of Engineering Ceramics[J]. APPLIED LASER, 2018, 38(1): 64.