高氮钢复合焊接电弧能量对焊接接头性能影响

辛秀成; 张今捷; 黄根哲; 张宏; 王金钢

应用激光, 2017, 37 (5): 668, 网络出版: 2017-11-24

高氮钢复合焊接电弧能量对焊接接头性能影响

Effect of Arc Energy on Performance of Welded Joint with High Nitrogen Steel

论文大纲

辛秀成 ^*张今捷黄根哲张宏王金钢

作者单位

长春理工大学机电工程学院, 吉林长春 130022

高氮钢激光-电弧复合焊接电弧能量接头性能 high nitrogen steel laser-arc hybrid welding arc energy connector performance

摘要

以8 mm厚的高氮钢板为试验材料, 采用额定功率为4 kW的 Nd:YAG固体激光器对其进行了激光-电弧复合焊接, 研究了不同电弧能量对焊接接头性能的影响。研究表明, 随着电弧能量的增加, 焊接表面质量有所提高; 焊缝的熔深及熔宽随电弧能量的增加而增大, 且熔深较熔宽增加更明显, 热影响区范围随电弧能量增加而增大; 随着电弧能量的增加, 熔池熔滴过渡由滴状过渡转变为射流为主、射滴为辅的过渡形式; 焊接接头的硬度值随着电弧能量的增加呈整体下降趋势, 且造成硬度下降的原因是焊接接头的氮含量随热输入的增加而降低。

Abstract

The Nd:YAG solid-state lasers with rated power of 4 KW were laser-arc hybrid welding with high nitrogen steel plate with 8mm thickness as the test material,the effects of different arc energy on the performance of welded joints were studied.By means of this,With the increase of arc energy, the welding surface quality has improved;the weld penetration and the width increase with the increase of the arc energy, and the penetration depth is more obvious than the melting width, and the heat affected zone increases with the increase of the arc energy;with the increase of arc energy, the droplet transfer of molten pool is changed from droplet transition to jet, and the transition form is the auxiliary form;the hardness of the welded joint decreases as the arc energy increases, and the reason for the decrease in hardness is that the nitrogen content of the welded joint decreases with increasing heat input.

参考文献

[1] HIGHBERGER W T.Advanced Ti materials and process for application to naval aircraft structures［J］.Materials, 1980(10)：539-553.

[2] 李卓然, 张久海, 冯吉才.锡青铜-镍-钢扩散连接工艺研究［J］.焊接技术, 1999(2)：6-7.

[3] HARZENMOSER M.Welding of high nitrogen steels［J］.Materials and Manufacturing Process, 2004, 19(1)：75-86.

[4] WOO I, KIKUCHI Y.Weldability of high nitrogen stainless steel［J］.ISIJ International, 2002, 42(12)：1334-1343.

[5] STEEN W M.Arc augmented laser processing of materials［J］.Journal of Application Physics, 1980, 51(11)：5636-5641.

[6] LABUDOVIC M, KOVACEVICT R.Use of a laser/TIG combination for surface modification of Ti-6Al-4V alloy［J］.Journal of Materialsence & Technology, 2001(2)：237-239.

[7] 陈彦宾, 李俐群, 吴林.电弧对激光吸收与散焦的定量测量［J］.焊接学报, 2004, 24(3)：56-58.

[8] 袁胜涛.低功率激光+电弧复合热源焊接过程中复合模式的研究及应用［D］.大连：大连理工大学, 2012.

[9] 史平安, 赵明成, 莫军, 等.铍材钎焊熔池动态行为的影响因素研究［J］.机械工程学报, 2011, 47(14)：76-82.

[10] 刘凤德, 张宏, 王宇琪, 等.面能量对激光-电弧复合焊接焊缝及熔滴过渡的影响［J］.机械工程学报, 2012, 48(14)：84-90.

[11] QIN GUOLIANG, LI ZHEN, LIN SHANGYANG.Effects of Nd:YAG laser＋pulsed MAG are hybrid welding parameters on its weld shape［J］.Sci. Weld. Joining, 2007, 12(1)：79-86.

辛秀成, 张今捷, 黄根哲, 张宏, 王金钢. 高氮钢复合焊接电弧能量对焊接接头性能影响[J]. 应用激光, 2017, 37(5): 668. Xin Xiucheng, Zhang Jinjie, Huang Genzhe, Zhang Hong, Wang Jingang. Effect of Arc Energy on Performance of Welded Joint with High Nitrogen Steel[J]. APPLIED LASER, 2017, 37(5): 668.

高氮钢复合焊接电弧能量对焊接接头性能影响

关于本站 Cookie 的使用提示

全站搜索

高氮钢复合焊接电弧能量对焊接接头性能影响

相关论文

相关资讯

关于本站 Cookie 的使用提示

全站搜索