In this paper, a novel liquid level sensor with ultra-high sensitivity is proposed. The proposed sensor is configured by a slice-shaped composite long period fiber grating (SSC-LPFG). The SSC-LPFG is prepared by polishing two opposite sides of a composite multimode–single-mode–multimode fiber structure using a CO2 laser. The method improves the sensitivity of the sensor to external environment. Based on the simulation calculation, a liquid level sensor with a length of 3 mm is designed. The experimental transmission spectrum agrees well with the simulation result. The experimental results show that the sensitivity reaches 7080 pm/mm in the liquid level range of 0–1400 μm in water. The temperature sensitivity is 24.52 pm/°C in the range of 20°C–90°C. Due to the ultra-high sensitivity, good linearity, and compact structure, the SSC-LPFG has potential application in the field of high-precision liquid level measurement.

A novel phase-shifted long-period fiber grating (PS-LPFG) for the simultaneous measurement of torsion and temperature is described and experimentally demonstrated. The PS-LPFG is fabricated by inserting a pre-twisted structure into the long-period fiber grating (LPFG) written in single-mode fiber (SMF). Experimental results show that the torsion sensitivities of the two dips are ?0.114 nm/(rad/m) and ?0.069 nm/(rad/m) in the clockwise direction, and ?0.087 nm/(rad/m) and ?0.048 nm/(rad/m) in the counterclockwise direction, respectively. The temperature sensitivities of the two dips are 0.057 nm/°C and 0.051 nm/°C, respectively. The two dips of the PS-LPFG exhibit different responses to torsion and temperature. Simultaneous measurement of torsion and temperature can be implemented using a sensor. The feasibility and stabilization of simultaneous torsion and temperature measurement have been confirmed, and hence this novel PS-LPFG demonstrates potential for fiber sensing and engineering applications.

A torsion sensor based on the near-helical (NH) long period fiber grating (LPFG) is fabricated by using a high frequency pulsed CO₂ laser. Each groove of the NH-LPFG is spirally written in the four sides of a single-mode fiber. The NH-LPFG has a helical periodic vertical index modulation. This is different from the screw-type index modulation of the common helical LPFGs (H-LPFGs) fabricated in a twisted fiber. The torsion and temperature characteristics of the NH-LPFG are experimentally investigated. The temperature sensitivity is about 0.0668 nm/°C. The torsion sensitivity is 0.103 nm/(rad/m) and independent of the polarization state of incident light.