Dealing with the increase in data workloads and network complexity requires efficient selective manipulation of any channels in hybrid mode-/wavelength-division multiplexing (MDM/WDM) systems. A reconfigurable optical add-drop multiplexer (ROADM) using special modal field redistribution is proposed and demonstrated to enable the selective access of any mode-/wavelength-channels. With the assistance of the subwavelength grating structures, the launched modes are redistributed to be the supermodes localized at different regions of the multimode bus waveguide. Microring resonators are placed at the corresponding side of the bus waveguide to have specific evanescent coupling of the redistributed supermodes, so that any mode-/wavelength-channel can be added/dropped by thermally tuning the resonant wavelength. As an example, a ROADM for the case with three mode-channels is designed with low excess losses of <0.6, 0.7, and 1.3 dB as well as low cross talks of < - 26.3, -28.5, and -39.3 dB for the TE₀, TE₁, and TE₂ modes, respectively, around the central wavelength of 1550 nm. The data transmission of 30 Gbps / channel is also demonstrated successfully. The present ROADM provides a promising route for data switching/routing in hybrid MDM/WDM systems.

Mode-division multiplexing (MDM) technology enables high-bandwidth data transmission using orthogonal waveguide modes to construct parallel data streams. However, few demonstrations have been realized for generating and supporting high-order modes, mainly due to the intrinsic large material group-velocity dispersion (GVD), which make it challenging to selectively couple different-order spatial modes. We show the feasibility of on-chip GVD engineering by introducing a gradient-index metamaterial structure, which enables a robust and fully scalable MDM process. We demonstrate a record-high-order MDM device that supports TE₀–TE₁₅ modes simultaneously. 40-GBaud 16-ary quadrature amplitude modulation signals encoded on 16 mode channels contribute to a 2.162 Tbit / s net data rate, which is the highest data rate ever reported for an on-chip single-wavelength transmission. Our method can effectively expand the number of channels provided by MDM technology and promote the emerging research fields with great demand for parallelism, such as high-capacity optical interconnects, high-dimensional quantum communications, and large-scale neural networks.

Compact passive silicon photonic devices with high performance are always desired for future large-scale photonic integration. Inverse design provides a promising approach to realize new-generation photonic devices, while it is still very challenging to realize complex photonic devices for most inverse designs reported previously due to the limits of computational resources. Here, we present the realization of several representative advanced passive silicon photonic devices with complex optimization, including a six-channel mode (de)multiplexer, a broadband 90 deg hybrid, and a flat-top wavelength demultiplexer. These devices are designed inversely by optimizing a subwavelength grating (SWG) region and the multimode excitation and the multimode interference are manipulated. Particularly, such SWG structures are more fabrication-friendly than those random nanostructures introduced in previous inverse designs. The realized photonic devices have decent performances in a broad bandwidth with a low excess loss of <1 dB, which is much lower than that of previous inverse-designed devices. The present inverse design strategy shows great effectiveness for designing advanced photonic devices with complex requirements (which is beyond the capability of previous inverse designs) by using affordable computational resources.

We designed a tunable wavelength-selective quasi-resonant cavity enhanced photodetector (QRCE-PD) based on a high-contrast subwavelength grating (SWG). According to simulation results, its peak quantum efficiency is 93.2%, the 3 dB bandwidth is 33.5 GHz, the spectral linewidth is 0.12 nm, and the wavelength-tuning range is 28 nm (1536–1564 nm). The QRCE-PD contains a tunable Fabry–Perot (F-P) filtering cavity (FPC), a symmetrical SWG deflection reflector (SSWG-DR), and a built-in p-i-n photodiode. The FPC and the SSWG-DR form an equivalent multi-region F-P cavity together by multiple mutual mirroring, which makes the QRCE-PD a multi-region resonant cavity enhanced photodetector. But, QRCE-PD relies on the multiple-pass absorption enhanced effect to achieve high quantum efficiency, rather than the resonant cavity enhanced effect. This new photodetector structure is significant for the application in the dense wavelength division multiplexing systems.