光学学报, 2013, 33 (6): 0612005, 网络出版: 2013-05-15   

基于移相算法的玻璃应力延迟量快速测量方法

A Method Based on Phase Shifting Algorithm for Fast Measurement of Stress Retardation of Optical Glass
作者单位
南京理工大学电子工程与光电技术学院, 江苏 南京 210094
摘要
为了测量光学玻璃的全场应力延迟量,提出了一种基于移相算法和自准直光路系统的应力测量方案。测试光两次通过被测件使应力信息放大1倍。根据应力条纹图对比度选定移相步长,分析一组具有高对比度的移相应力条纹图实现方砖延迟量的全场分布测量。通过仿真得到该方法的测量精度达0.2 nm/cm,测量结果显示退火方砖的中间区域应力延迟量为3 nm/cm,边沿区域为9 nm/cm。采用该方法,可以快速实现应力延迟量的全场高精度测量。
Abstract
In order to determine the stress retardation distribution of optical glass, a novel method based on phase shifting algorithm and autocollimation method is proposed. An enlargement of the retardation of specimen can be achieved because of the autocollimation architecture. The phase shift step is fixed on according to the contrast of stress fringe patterns. The stress retardation can be acquired by analyzing a set of phase shifting stress fringe patterns with high contrast. The simulated result shows an accuracy of 0.2 nm/cm. The experimental result indicates that the retardation in the central area of annealed glass cube is 3 nm/cm while in the edge area it is 9 nm/cm. Fast stress retardation measurement with high precision can be realized by this method.
参考文献

[1] A. S. Redner, A. S. Voloshin. Surface and face stress in tempered glass [C]. Proceedings of 9th International Conference on Experimental Mechanics, 1990, 2: 884~912

[2] ASTM. Standard Test Method for Non-Destructive Photoelastic Measurement of Edge and Surface Stresses in Annealed, Heat-Strengthened, and Fully Tempered Flat Glass [S]. West Conshohocken: ASTM Standards, 2010

[3] M. R. Hutsel, R. Ingle, T. K. Gaylord.Accurate cross-sectional stress profiling of optical fibers[J]. Appl. Opt., 2009, 48(26): 4985~4995

[4] Y. Park, T. J. Ahn, T. H. Kim et al.. Measurement method for profiling the residual stress and the strain-optic coefficient of an optical fiber[J]. Appl. Opt., 2002, 41(1): 21~26

[5] 何勇, 王娉婷, 朱日宏 等. 光学玻璃应力的自动测试[J]. 玻璃与搪瓷, 2005, 33(3): 40~43

    He Yong, Wang Pingting, Zhu Rihong et al.. Autotesting of optical glass stress [J]. Glass & Enamel, 2005, 33(3): 40~43

[6] A. Asundi, L. Tong, C. G. Boay. Phase-shifting method with a normal polariscope[J]. Appl. Opt., 1999, 38(28): 5931~5935

[7] P. Pinit, E. Umezaki. Digitally whole-field analysis of isoclinic parameter in photoelasticity by four-step color phase-shifting technique[J]. Opt. & Lasers in Eng., 2007, 45(7): 795~807

[8] X. F. Yao, L. H. Jian, W. Xu et al.. Digital shifting photoelasticity with optical enlarged unwrapping technology for local stress measurement[J]. Opt. & Laser Technol., 2005, 37(7): 582~589

[9] Lei Zhenkun, Yun Dazhen, Yu Wanming. Whole-field determination of isoclinic parameter by five-step color phase shifting and its error analysis[J]. Opt. & Lasers in Eng., 2003, 40(3): 189~200

[10] 雷振坤, 云大真, 亢一澜. 数字光弹性中五步彩色相移法及其应用[J]. 光学学报, 2004, 24(2): 162~167

    Lei Zhenkun,Yun Dazhen, Kang Yilan. Five-step color phase-shifting technique in digital photo elasticity and its applications[J]. Acta Optica Sinica, 2004, 24(2): 162~167

[11] 计欣华, 张丽娜, 史丽军 等. 数字光弹性相移法中全场等倾角和等差线相位[J]. 光学学报, 2008, 28(2): 273~278

    Ji Xinhua, Zhang Lina, Shi Lijun et al.. Whole-field phase of isochromatic angle and isoclinic line in digital photoelastic phase-shifting technique[J]. Acta Optica Sinica, 2008, 28(2): 273~278

[12] 张丽君, 沙定国, 聂林秋. 基于移相法的光学玻璃应力等倾角全场数字化测量[J]. 光学技术, 2004, 30(3): 199~203

    Zhang Lijun, Sha Dingguo, Nie Linqiu. Whole-field digital measurement of the stress isoclinic parameter of optical glass based on phase shifting[J]. Optical Technique, 2004, 30(3): 199~203

[13] A. Ajovalasit, G. Petrucci, M. Scafidi. Measurement of edge residual stresses in glass by the phase-shifting method[J]. Opt. & Lasers in Eng., 2011, 49(5): 652~657

[14] 李志诚, 唐志列, 陈萍 等. 基于斯托克斯参量的光弹性应力分布及成像方法研究[J]. 光学学报, 2012, 32(5): 0512005

    Li Zhicheng, Tang Zhilie, Chen Ping et al.. Study of photoelastic stress distribution and imaging method based on Stokes parameters[J]. Acta Optica Sinica, 2012, 32(5): 0512005

[15] Е. Э. 达纽舍夫斯基. 光学玻璃线性退火原理[M]. 邹德 译.北京: 国防工业出版社, 1965

    Е. Э. Danu Krzyzewski. Principles of Optical Glass Linear Annealing [M]. Zou De Transl. Beijing: National Defense Industry Press, 1965

[16] 王建宇, 吴金才, 何志平. 一种标定偏振片透光轴的装置及方法[P]. 中国: CN102279094A, [2011-12-14]

    Wang Jianyu, Wu Jincai, He Zhiping. Device and Method of Calibrating the Light-Transmissive Axis of Polarizer [P]. China: CN102279094A, [2011-12-14]

[17] 杨坤, 曾爱军, 王向朝 等. 基于基频分量消光的1/4波片快轴标定方法 [J]. 中国激光, 2007, 34(11): 1553~1556

    Yang Kun, Zeng Aijun, Wang Xiangzhao et al.. Fast axis calibration of quarter wave plate by fundamental component extinction[J].Chinese J. Lasers, 2007, 34(11): 1553~1556

李金鹏, 陈磊, 乌兰图雅, 杨鸣箫, 周舒, 朱荣刚, 郑东晖. 基于移相算法的玻璃应力延迟量快速测量方法[J]. 光学学报, 2013, 33(6): 0612005. Li Jinpeng, Chen Lei, Wulan Tuya, Yang Mingxiao, Zhou Shu, Zhu Ronggang, Zheng Donghui. A Method Based on Phase Shifting Algorithm for Fast Measurement of Stress Retardation of Optical Glass[J]. Acta Optica Sinica, 2013, 33(6): 0612005.

本文已被 3 篇论文引用
被引统计数据来源于中国光学期刊网
引用该论文: TXT   |   EndNote

相关论文

加载中...

关于本站 Cookie 的使用提示

中国光学期刊网使用基于 cookie 的技术来更好地为您提供各项服务,点击此处了解我们的隐私策略。 如您需继续使用本网站,请您授权我们使用本地 cookie 来保存部分信息。
全站搜索
您最值得信赖的光电行业旗舰网络服务平台!