[1] 张龙，陈霖东，江桥，等．非接触式配向工艺(光配向工艺)Zara Particle不良产生机理分析及改善方向研究［J］．电子世界，2017(11)：117-119．

    ZHANG L, CHEN L D, JIANG Q, et al. Principle and improving research of Zara Particle of non-contact rubbing process (Photo-Alignment process) ［J］. Electronics World, 2017(11): 117-119. (in Chinese)

[2] 申智源．TFT-LCD技术：结构、原理及制造技术［M］．北京：电子工业出版社，2012．

    SHEN Z Y. TFT -LCD Technology: Structure, Principle and Manufacturing Techniques ［M］. Beijing: Publishing House of Electronics Industry, 2012. (in Chinese)

[3] 张鹏，马婷婷，杨叶花，等．液晶显示器Mura缺陷及测量方法浅析［J］．电子测试，2017(6)：50-52．

    ZHANG P, MA T T, YANG Y H, et al. Mura defect and measurement method of liquid crystal display ［J］. Electronic Test, 2017(6): 50-52. (in Chinese)

[4] ZHANG W, SONG S H, LIJ, et al. Analysis of rubbing Mura in fringe field switching liquid crystal display ［J］. SID Symposium Digest of Technical Papers, 2013, 44(1): 1122-1125.

[5] 高荣荣，姚成宜，叶超前，等．关于TN型TFT-LCD中周边Mura的分析与改善［J］．电子世界，2014(18)：160．

    GAO RR, YAO C Y, YE C Q, et al. Analysis and improvement of Edge Mura in TN type TFT – LCD ［J］. Electronics World, 2014(18): 160. (in Chinese)

[6] 石天雷，杨国波，刘亮，等．ODF工艺用封框胶的研究［J］．光电子技术，2011，31(3)：211-214．

    SHI T L, YANG G B, LIU L, et al. The research of sealant used in ODF process ［J］. Optoelectronic Technology, 2011, 31(3): 211-214. (in Chinese)

[7] 毕昕，丁汉．TFT-LCD Mura缺陷机器视觉检测方法［J］．机械工程学报，2010，46(12)：13-19．

    BI X, DING H. Machine vision inspection method of Mura defect for TFT-LCD ［J］. Journal of Mechanical Engineering,2010, 46(12): 13-19. (in Chinese)

[8] TSAI J Z, CHANG R S, LI TY. Detection of gap Mura in TFT LCDs by the interference pattern and image sensing method ［J］. IEEE Transactions on Instrumentation and Measurement, 2013, 62(11): 3087-3092.

[9] 桑胜光，车晓盼，王嘉黎，等．高PPI ADS产品白Mura不良产生原理及改善研究［J］．液晶与显示，2016，31(5)：435-441．

    SANG S G, CHE X P, WANG J L, et al. Principle and improving research of white mura defect in high PPI ADS product ［J］. Chinese Journal of Liquid Crystals and Displays, 2016, 31(5): 435-441. (in Chinese)