[1] Suratwala T, Wang L, Miller P. Subsurface mechanical damage distribution during grinding of fused silica[J]. Journal of Non-Crystalline Solids, 2006, 352:5601-5617.

[2] 张银霞. 单晶硅片超精密磨削加工表面层损伤的研究[D].大连:大连理工大学,2006:3-20.(Zhang Yinxia. Study on the surface layer damage of monocrystalline silicon wafer induced by ultra-precision grinding. Dalian: Dalian University of Technology, 2006:3-20)

[3] 王卓,吴宇列,戴一帆,等.光学材料研磨亚表面损伤的快速检测及其影响规律[J].光学精密工程, 2008, 16(1):1-21.(Wang Zhuo, Wu Yulie, Dai Yifan, et al. Rapid detection of subsurface damage of optical materials in lapping process and its influence regularity. Optics and Precision Engineering, 2008, 16(1):1-21)

[4] Sun X, Stephenson D J, Ohnishi O, et al. An investigation into parallel and cross grinding of BK7 glass[J]. Precision Engineering, 2006,30:145-153.

[5] Tonnellier X, Shore P, Luo X, et al. Wheel wear and surface subsurface qualities when precision grinding optical materials[C]//Proc of SPIE. 2006,6273:61-70.

[6] 王卓. 光学材料加工亚表面损伤检测及控制关键技术研究[D].长沙:国防科学技术大学,2008:5-18.(Wang Zhuo. Study on the detection and control techniques of subsurface damage in optical fabrication. Changsha: National University of Defense Technology, 2008:5-18)

[7] Xu H H K, Jahanmir S. Simple technique for observing subsurface damage in machining of ceramics[J]. Journal of the American Ceramic Society, 1994, 77: 1388-1390.

[8] Camp D W, Kozlowski M R, Sheehan L M. Subsurface damage and polishing compound affect the 355-nm laser damage threshold of fused silica surfaces[C]//Proc of SPIE. 1998, 3244:356-364.

[9] Lü Dongxi, Wang Hongxiang, Tang Yongjian, et al. Influences of vibration on surface formation in rotary ultrasonic machining of glass BK7[J]. Precision Engineering, 2013, 37(4): 839-848.

[10] Lü Dongxi, Huang Yanhua, Wang Hongxiang, et al. Improvement effects of vibration on cutting force in rotary ultrasonic machining of BK7 glass[J]. Journal of Materials Processing Technology, 2013, 213(9): 1548-1557.

[11] 秦北志,杨李茗,朱日宏,等. 光学元件精密加工中的磁流变抛光技术工艺参数[J]. 强激光与粒子束,2013,25(9):2281-2284.(Qin Beizhi,Yang Liming,Zhu Rihong,et al. Polishing parameters of magnetorheological finishing for high precision optical components. High Power Laser and Particle Beams,2013,25(9):2281-2284)

[12] 徐曦,杨李茗,石琦凯,等. 磁流变加工对中频误差的影响[J]. 强激光与粒子束,2012,24(7):1695-1698.(Xu Xi,Yang Liming,Shi Qikai,et al. Effect of magnetorheological finishing on mid-spatial frequency error. High Power Laser and Particle Beams, 2012,24(7):1695-1698)

[13] Menapace J A, Davis P J, Steele W A, et al. MRF applications: measurement of process-dependent subsurface damage in optical materials using the MRF wedge technique[C]//Proc of SPIE. 2005, 5991: 39-49.

[14] Menapace J A, Davis P J, Steele W A, et al. MRF applications: on the road to making large-aperture ultraviolet laser resistant continuous phase plates for high-power lasers[C]//Proc of SPIE.2006, 6403: 64-69.