中国激光, 2002, 29 (s1): 494, 网络出版: 2013-02-23
固化温度对纳米微结构制备的影响
Effects of Thermal Treatment on Preparation of Laser-induced Periodic Surface Structures
激光诱导周期表面结构(L1PSS) 聚酰亚胺薄膜 紫外激光 Nd:YAG激光器 laser-induced periodic surface structures (LIPSS) polyimide film ultraviolet laser Nd:YAG laser
摘要
在100 ℃, 150 ℃和270 ℃下固化得到了四种聚酰亚胺薄膜, 薄膜的固化温度对其性能有重要影响。 采用波长把5 nm的偏振紫外脉冲激光,在四种聚酰亚胺薄膜表面成功制备了纳米微条纹结构, 并研究了固化温度对微结构的形成过程及其形态的影响。
Abstract
The properties of polyimide film were greatly influenced by the thermal treatment temperature. Laser-induced periodic surface structure (LIPSS) on PI films were studied at different temperatures ranging frcxn 100 ℃ to 270 ℃. The ripples were obtained on PI films under irradiation of linearly polarized UV laser with a wavelength of 355 nm. The effects thermal treatment temperatures on formation process and the configuration of LIPSS were investegated.
李梅, 路庆华, 王宗光, 钱昱. 固化温度对纳米微结构制备的影响[J]. 中国激光, 2002, 29(s1): 494. LI Mei, LU Qing-hua, WANG Zong-guang, QIAN Yu. Effects of Thermal Treatment on Preparation of Laser-induced Periodic Surface Structures[J]. Chinese Journal of Lasers, 2002, 29(s1): 494.