[1] 宁磊, 史永盛, 史耀华, 等. LED封装结构对出光率的影响 ［J］. 液晶与显示, 2010, 25(6):822-825.NING L, SHI Y S, SHI Y H, et al.. Influence of package structure on LED light extraction ［J］. Chin. J. Liq. Cryst. Disp., 2010, 25(6):822-825. (in Chinese)

[2] 白一鸣, 罗毅, 韩彦军, 等. 集成封装发光二极管光提取效率的计算及优化 ［J］. 光学 精密工程, 2014, 22(5):1129-1137.BAI Y M, LUO Y, HAN Y J, et al.. Calculation and optimization of light extraction efficiency for integrated LED ［J］. Opt. Precision Eng., 2014, 22(5):1129-1137. (in Chinese)

[3] NARENDRAN N, GU Y. Life of LED-based white light sources ［J］. J. Disp. Technol., 2005, 1(1):167-171.

[4] NARENDRAN N, GU Y, FREYSSINIERJ P, et al.. Solid-state lighting: failure analysis of white LEDs ［J］. J. Cryst. Growth, 2004, 268(3):449-456.

[5] ARIK M, BECKER C A, WEAVERS E, et al.. Evaluation of temperature distribution of LED module ［J］. Microelectron. Reliab., 2013, 53(4):554-559.

[6] NARENDRAN N, GU Y, HOSSEINZADEH R. The degradation of GaAlAs red light-emitting diodes under continuous and low-speed pulse operation ［J］. Microelectron. Reliab., 1998, 38(10):1627-1630.

[7] 王志斌,刘永成,李志全. 双进双出射流水冷大功率LED散热系统研究 ［J］. 光子学报, 2014, 43(7):0723003-1-6.WANG Z B, LIU Y C, LI Z Q. Analysis on high power LED cooling system based on double inlet and outlet water jet ［J］. Acta Photon. Sinica, 2014, 43(7):0723003-1-6. (in Chinese)

[8] LI X, CHEN X, LU G Q. Reliability of high-power light emitting diode attached with different thermal interface materials ［J］. J. Electron. Pack., 2010, 132(3):031011-1-6.

[9] MANIKAM V R, CHEONG K Y. Die attach materials for high temperature applications: a review ［J］. IEEE Trans. Compon. Pack. Manufact. Technol., 2011, 1(4):457-478.

[10] RIMDUSIT S, ISHIDA H. Development of new class of electronic packaging materials based on ternary systems of benzoxazine, epoxy, and phenolic resins ［J］. Polymer, 2000, 41(22):7941-7949.

[11] 兰海, 邓种华, 刘著光, 等. LED的COB封装热仿真设计 ［J］. 发光学报, 2012, 33(5):535-539.LAN H, DENG Z H, LIU Z G, et al.. Thermal simulation for design of LED COB package ［J］. Chin. J. Lumin., 2012, 33(5):535-539. (in Chinese)

[12] 马建设, 贺丽云, 刘彤, 等. 板上芯片集成封装的发光二极管结构设计 ［J］. 光学 精密工程, 2013, 21(4):904-910.MA J S, HE L Y, LIU T, et al.. Design of optical structure for chip-on-board wafer level packaging LEDs ［J］. Opt. Precision Eng., 2013, 21(4):904-910. (in Chinese)

[13] 王健, 黄先, 刘丽, 等. 温度和电流对白光LED发光效率的影响 ［J］. 发光学报, 2008, 29(2):358-362.WANG J, HUANG X, LIU L, et al.. Effect of temperature and current on LED luminous efficiency ［J］. Chin. J. Lumin., 2008, 29(2):358-362. (in Chinese)

[14] 郑峰, 刘丽莹, 刘小溪, 等. 多主色LED照明光源的相关色温调控 ［J］. 光学 精密工程, 2015, 23(4):927-933. ZHENG F, LIU L Y, LIU X X, et al.. Control of correlated color temperature for multi-primary color LED illumination ［J］. Opt. Precision Eng., 2015, 23(4):927-933. (in Chinese)