[1] MENG H Y,JI Y C,CHENG W W,et al. Crackfree direct-writing on quartz and glass for microfluidic chip development[J]. SPIE,2004,5662:101-106.

[2] 洪蕾，李力均．工种陶瓷激光切割工艺的试验研究[J]．中国机械工程，2000，11(12)：1410-1413．

    HONG Lei,LI Li-jun. Research on laser cutting tests for engineering ceramics[J]. China Mechanical Engineering,2000,11(12):1410-1413. (in Chinese)

[3] MISKYS C R,KELLY M K,AMBACHER O,et al. Freestanding GaN-substrates and devices[J].Phys. Stat. Sol. (c),2003 (6) :1627-1650.

[4] 王耀祥．光学玻璃的发展及其应用[J]．应用光学，2005，26(5)：61-66．

    WANG Yao-xiang. Development and application of optical glasses[J]. Journal of Applied Optics,2005,26(5): 61-66. (in Chinese)

[5] 刘青，陈钧均，郭丽丽．超短激光脉冲对宽带光学物质的微加工[J]．应用光学，2006，27(5)：428-432．

    LIU Qing,CHEN Jun-jun,GUO Li-li. Micromachining of wide-band optical materials with ultrashort laser pulses [J]. Journal of Applied Optics,2006,27(5):428-432. (in Chinese)

[6] HERMANNS C. Laser cutting of glass [J]. SPIE,2000,4102:219-226.

[7] SMITH R N. Fracture characteristics of an aluminum oxide ceramic during continuous wave carbon dioxide laser cutting[J]. SPIE,1991,1722:337-347.

[8] LI K,SHENG P. Plane stress model for fracture of ceramics during laser cutting [J]. Int. J. Mach.Tools Manufacture,1995,35(11):1493-1506.

[9] LU G,SIORES E,WANG B. An empirical equation for crack formation in the laser cutting of ceramic plates[J]. Journal of Materials Processing Technology,1999,88(15):154-158.

[10] COSP J P,RAMIREZ DEL VALLE A J,FORTEA J G,et al. Laser cutting of high-vitrified ceramic materials: development of a method using a Nd∶YAG laser to avoid catastrophic breakdown [J]. Materials Letters,2002,55(4):274-280.

[11] BLACK I,CHUA K L. Laser cutting of thickceramic tile[J]. Optics and Laser Technology,1997,29(4): 193-205.

[12] BLACK I. Laser cutting speeds for ceramic tile: a theoretical-empirical comparison [J]. Optics and Laser Technology,1998,30(2):95-101.

[13] HONG L,LI J L,JU C L. Investigation of cutting of engineering ceramics with Q-switched pulse CO₂ laser[J]. Optics and Lasers in Engineering,2002,38(5):279-289.

[14] TRIANTAFYLLIDIS D. Dual laser beam modification of high alumina ceramics [J]. Journal of Laser Application,2003,15(1):49-54.

[15] 周岩，刘晓胜，杨乐民．熔融石英激光切割表面形貌的研究[J]．激光杂志，2003，24(3)：70-72．

    ZHOU Yan,LIU Xiao-sheng,YANG Le-min.Study on the surface appearance of laser beam cutting fused quartz crystals [J]. Laser Journal,2003,24(3):70-72. (in Chinese)

[16] 周岩，刘晓胜，陈向阳，等．石英晶体激光切割参数建模[J]．激光技术，2000，24(2)：74-78．

    ZHOU Yan,LIU Xiao-sheng,CHEN Xiang-yang,et al. Modeling on the parameters of laser cutting quartz crystal [J]. Laser Technology,2000,24(2):74-78. (in Chinese)

[17] MORITA N. Pulsed laser processing of ceramics in water[J]. Applied Physics Letters,1988,52(23):1965-1966.

[18] 凌磊，楼棋洪，李抒智，等．水浴条件下YAG倍频激光切割Si片的实验研究[J]．激光技术，2004，28(2)：131-143.

    LING Lei,LOU Qi-hong,Li Shu-zhi,et al.Microcutting Si wafer in water bath by second harmonic output of YAG laser [J]. Laser Technology,2004,28(2):131-143. (in Chinese)

[19] 楼棋洪，章琳，叶震寰，等．紫外激光切割Si片的实验研究[J]．激光技术，2002，26(4)：250-254．

    LOU Qi-hong,ZHANU Lin,YE Zhen-huan,et al. Experimental research on Si cutting by using UV excimerlaser[J]. Laser Technology,2002,26(4):250-254. (in Chinese)

[20] LUMLEY R M. Controlled separation of brittle materials using a laser [J]. American Ceramic Society Bulletin,1969,48(1):850-854.

[21] KONDRATENKO V S. Method of splitting nonmetallic materials: US,5609284[P]. 1997-05-11.

[22] HOEKSTRA B L,PIEROLA J A. Method and apparatus for separating non-metallic substrates utilizing a supplemental mechanical force applicator: US,6252197 B1[P]. 2001-06-26.

[23] CHOOL D H,KIM B I. Laser cutting apparatus and method: US,6407360 B1[P]. 2002-06-18.

[24] KONDRATENKO V S. Cutting method for brittle non-metallic materials (two variants) : US,20040251290A1[P]. 2004-12-16.

[25] SYSOEV V K,ZAKHARCHENKO A V,VYATLEV P A. Increasing the efficiency of controllable laser thermal cleavage of insulating materials[J]. Journal of Optics Technology,2004,71 (2): 117-120.

[26] TSAI C H,CHEN H W. Laser cutting of thick ceramic substrates by controlled fracture technique [J]. Journal of Materials Processing Technology,2003,136(10):166-173.

[27] PATERSON N,TAWN A. On the numerical modeling of laser shearing of glass sheets used to optimize production methods [J]. Proceedings of the Institution of Mechanical Engineers,Part C:Journal of Mechanical Engineering Science,2004,218(1):1-11.

[28] YAMADA K,UEDA T,HOSOKAWA A,et al.Thermal damage of silicon wafer in thermal cleaving process with pulsed laser and CW laser [J]. SPIE,2006,6107: 1-10.

[29] KONDRATENKO V,TCHERNYKH S,GINDIN P. Laser controlled thermocracking die separation technique for sapphire substrate based devices[J].Phys. Stat. Sol. (c),2003(7):2232-2235.

[30] 陶伟明，毕国丽，章惠全，等．钠钙玻璃板激光热应力切割过程的有限元仿真[J]．浙江大学学报，2005，39(9)：1423-1426．

    TAO Wei-ming,BI Guo-li,ZHANG Hui-quan,et al. Finite element simulation of laser-controlled thermal stress separation of soda-lime glass plate [J]. Journal of Zhejiang University (Engineering Science),2005,39(9): 1423-1426. (in Chinese)

[31] CHU J T,KUO H C,KAO C C,et al. Fabrication of p-side down GaN vertical light emitting diodes on copper substrates by laser lift-off [J]. Phys. Stat.Sol.(c),2004,1(10):2413-2416.

[32] INOUE S,UTSUNOMIYA S,SAEKI T. Surfacefree technology by laser annealing (SUFTLA) and its application to poly-Si TFT-LCDs on plastic film with integrated drivers [J] IEEE Transaction on Electron Devices,2002,49(8):1353-1359.

[33] MA E Y,WAGNER S. Amorphous silicon transistors on ultrathin steel foil substrates[J]. Applied Physics Letters,1999,74(18):2661-2662.