分流法小孔电火花加工与试验
[1] 郭锐,赵万生,李刚,等.微细电火花加工的微细电极在线检测[J].光学 精密工程,2006,14(6):998-1003.
[2] 李勇,郭旻,周兆英,等.特种微型机械加工技术[J].光学 精密工程,2000,8(3):287-291.
LI Y, GUO M, ZHOU ZH Y, et al.. Overview of non-traditional micromachining technologies [J]. Opt. Precision Eng., 2000,8(3):287-291. (in Chinese)
[3] 钟先信,李建蜀,肖沙里,等.微系统集成技术研究的动向[J].光学 精密工程,1998,6(4):1-6.
ZHONG X X, LI J SH, XIAO SH L, et al. Progress in microsystems in tegrated technology [J]. Opt. Precision Eng., 1998,6(4):1-6. (in Chinese)
[4] MASUZAWA T. An approach to micro-machining through machine tool technology [C]. 14th International Symposium on Electro machining. Edinburgh, 2004:185-190.
[5] . 微细电火花加工及其关键技术[J]. 机械工程师, 2004, 2: 3-7.
. Micro-EDM and its key techniques[J]. Mechanical Engineer, 2004, 2: 3-7.
[6] . Batch mode micro-electro-discharge machining[J]. Journal of Micro-electromechanical Systems, 2002, 11(4): 102-111.
[7] MASUZAWA T. State of the art of micro-machining [J]. Annals of the CIRP.2000,49(2):473-488.
[8] 吕战竹,赵福令,张龙,等. 混粉电火花加工机理的分析[J]. 模具工业,2003,(8):49-52.
L ZH ZH, ZHAO F L, ZHANG L, et al.. Analysis of the mechanism of powder-mixed EDM[J]. Die &Mould Industry, 2003,(8):49-52. (in Chinese)
[9] . 混粉电火花加工中粉末对工件表面的影响[J]. 中国机械工程, 2005, 16(7): 618-622.
. . Influences of powder on the surface of workpiece in powder- mixed EDM[J]. China Mechanical Engineering, 2005, 16(7): 618-622.
[10] . 微细电火花加工系统及其工艺技术[J]. 中国机械工程, 2008, 19(5): 526-530.
. . Research on a Micro-EDM system and its techniques[J]. China Mechanical Engineering, 2008, 19(5): 526-530.
[11] . 微细电火花加工用晶体管脉冲电源的研究[J]. 中国机械工程, 2006, 17(20): 2094-2097.
. Study on the transistor type pulse generator for Micro-EDM[J]. China Mechanical Engineering, 2006, 17(20): 2094-2097.
[12] . 电火花加工技术研究的发展趋势预测[J]. 机床与液压, 2008, 36(2): 174-178.
. . The development forecast of electrical discharge machining technology[J]. Machine Tool & Hydraulics, 2008, 36(2): 174-178.
王续跃, 李建丽, 周彪, 梁延德, 赵福令. 分流法小孔电火花加工与试验[J]. 光学 精密工程, 2009, 17(11): 2730. WANG Xu-yue, LI Jian-li, ZHOU Biao, LIANG Yan-de, ZHAO Fu-ling. Electrical discharge machining for small-holes by current dividing[J]. Optics and Precision Engineering, 2009, 17(11): 2730.