[1] KADOTA M,TANAKA S.Ultra-wideband ladder filter using SH0 plate wave in thin LiNbO3 plate and its application to tunable filter［J］.IEEE Transactions on Ultrasonics Ferroelectrics & Frequency Control,2015,62(5):939.

[2] FU S,WANG W,QIAN L,et al.High-frequency surface acoustic wave devices based on ZnO/SiC layered structure［J］.IEEE Electron Device Letters,2019,40(1):103-106.

[3] 李佳励.高频梯形声表面波带通滤波器的设计［D］.广州:华南理工大学,2020.

[4] SU R,SHEN J,LU Z,et al.Wideband and low-loss surface acoustic wave filter based on 15°YX-LiNbO3/SiO2/Si structure［J］.IEEE Electron Device Letters,2021,42(3):438-441.

[5] 王为标.有限长声表面波器件的精确模拟 ［D］.南京:南京大学,2004.

[6] 王昊.声表面波器件的快速精确模拟研究［D］.南京:南京大学,2013.

[7] CHEN D P,HAUS H A.Analysis of metal-strip saw gratings and transducers［J］.IEEE Trans Sonics Ultrason,1985,32(3):395-408.

[8] SINHA B K,TIERSTEN H F.Variational analysis of the reflection of surface waves by arrays of reflecting strips［J］.Journal of Applied Physics,1976,47(7):2824-2832.

[9] 李桦林,谭发曾,伍平.基于层次级联模型的声表面波COM参数提取方法［J］.压电与声光,2022,44(2):187-190.

[10] 苏波,王为标,王昊,等.基于有限长FEM/BEM提取COM参量［J］.压电与声光,2014,36(2):167-170.

[11] 王昊,史向龙,王为标,等.声表面波耦合模参量的色散特性［C］//［S.l.］:中国声学学会,2011.

[12] SUN X,ZHOU S,CHENG J,et al.Full extraction of the COM parameters for Rayleigh type surface acoustic wave［J］.AIP Advances,2022,12(2):025007.

[13] WANG Weibiao,ZHANG Xiaodong,SHUI Yongan,et al.Study on the bulk wave radiation of finite-length SAW devices using FEM/BEM［J］.Progress in Natural Science,2005,15(5):402-406.

[14] HASHIMOTO K Y,OMORI T,YAMAGUCHI M.Extended FEM/SDA software for characterising surface acoustic wave propagation in multi-layered structures［C］//［S.l.］:Proceedings of the IEEE International Ultrasonics Symposium,IEEE,2007:711-714.

[15] KOSKELA J,PLESSKY V.Hierarchi calcascading in FEM simulations of SAW devices［J］.2018 IEEE International Ultrasonics Symposium,2018:1-11.

[16] IYAMA A,LI X,BAO J,et al.Full 3D FEM analysis of scattering at a border between IDT and reflector in SAW resonators［C］//［S.l.］:Proceedings of the 2019 IEEE International Ultrasonics Symposium,IEEE,2019:1235-1238.

[17] KOSKELA J,PLESSKY V,WILLEMSEN B,et al.Hierarchical cascading algorithm for 2D FEM simulation of finite SAW devices［J］.IEEE Transactions on Ultrasonics,Ferroelectrics,and Frequency Control,2018:1-5.

[18] LI X,BAO J,QIU L,et al.3D FEM simulation of SAW resonators using hierarchical cascading technique and general purpose graphic processing unit［J］.Jpn J Appl Phys,2019,58(SG).

[19] 陈正林,赵雪梅,贺艺,等.基于有限元分层级联技术SAW滤波器精确计算［J］.压电与声光,2022,44(2):234-237.

[20] CHEN Z,ZHANG Q,LI C,et al.Geometric nonlinear model for prediction of frequency-temperature behavior of SAW devices for nanosensor applications［J］.Sensors,2020,20(15):4237.