2008, 6(2) Column
Chinese Optics Letters 第6卷 第2期
An effective method for reducing the speckle noise in digital holography is proposed in this paper. Different from the methods based on classical filtering technique, it utilizes the multiple holograms which are generated by rotating the illuminating light continuously. The intensity images reconstructed by a series of holograms generated by rotating the illuminating light possess different speckle patterns. Hence by properly averaging the reconstructed intensity fields, the speckle noises can be reduced greatly. Experimental results show that the proposed method is simple and effective to reduce speckle noise in digital holography.
数字全息 散斑噪声 多幅全息图 090.0090 Holography 030.0030 Coherence and statistical optics 070.0070 Fourier optics and signal processing 120.0120 Instrumentation, measurement, and metrology A novel image fusion method using WBCT and PCADownload:809次
A novel image fusion algorithm based on wavelet-based contourlet transform (WBCT) and principal component analysis (PCA) is proposed. The PCA method is adopted for the low-frequency components. Using the proposed algorithm to choose the greater of the active measures, the region consistency test is performed for the high-frequency components. Experiments show that the proposed method works better in preserving the edge and texture information than wavelet transform method and Laplacian pyramid (LP) method do in image fusion. Four indicators for the fusion image are given to compare the proposed method with other methods.
图像融合 小波Contourlet变换 Contourlet变换 主分量分析 100.7410 Wavelets 100.0100 Image processing 100.2000 Digital image processing SiO2-TiO2 sol-gel films are deposited on SiO2/Si by dip-coating technique. The SiO2-TiO2 strips are fabricated by laser direct writing using an ytterbium fiber laser and followed by chemical etching. Surface structures, morphologies and roughness of the films and strips are characterized. The experimental results demonstrate that the SiO2-TiO2 sol-gel film is loose in structure and a shrinkage concave groove forms if the film is irradiated by laser beam. The surface roughness of both non-irradiated and laser irradiated areas increases with the chemical etching time. But the roughness of laser irradiated area increases more than that of non-irradiated area under the same etching time. After being etched for 28 s, the surface roughness value of the laser irradiated area increases from 0.3 nm to 3.1 nm.
激光直写 SiO2-TiO2 溶胶-凝胶 粗糙度 140.3390 Laser materials processing 160.4760 Optical properties 160.6060 Solgel 310.3840 Materials and process characterization We propose a two-color scheme of atom waveguides and one-dimensional (1D) optical lattices using evanescent wave fields of different transverse modes around an optical micro/nano-fiber. The atom guide potential can be produced when the optical fiber carries a red-detuned light with TE01 mode and a blue-detuned light with HE11 mode, and the 1D optical lattice potential can be produced when the red-detuned light is transformed to the superposition of the TE01 mode and HE11 mode. The two trapping potentials can be transformed to each other for accurately controlling mode transformation for the red-detuned light. This might provide a new approach to realize flexible transition between the guiding and trapping states of atoms.
130.2790 Guided waves 140.3510 Lasers, fiber The fatigue properties of laser peened aluminum alloy 7050 specimens with fastener holes were investigated. The surface profile and residual stress induced in the shock affected zone were characterized. Then, the fatigue specimens with notch were treated by laser peening (LP), and the fatigue lifes of LP-treated specimens were measured and compared with base materials without LP. The results indicated that LP improved the fatigue lifes of all tested specimens. The average fatigue lifes of specimens treated by LP before hole-drilling were 173% longer than those of untreated samples and had better effects than those specimens treated by LP after hole-drilling.
激光冲击处理 铝合金 紧固孔 疲劳性能 350.3850 Materials processing 350.5340 Photothermal effects 320.4240 Nanosecond phenomena Dynamics of a semiconductor laser subject to moderate optical feedback operating in the low-frequency fluctuation regime is numerically investigated. Multimode Lang-Kobayashi (LK) equations show that the low-frequency intensity dropout including the total intensity and sub-modes intensity is accompanied by sudden dropout simultaneously, which is in good agreement with experimental observation. The power fluctuation is quite annoying in practical applications, therefore it becomes important to study the mechanism of power fluctuation. It is also shown that many factors, such as spontaneous emission noise and feedback parameter, may influence power fluctuation larger than previously expected.
波动 弛豫 噪声 光谱分析 线宽 半导体激光器 270.2500 Fluctuations, relaxations, and noise 070.4790 Spectrum analysis 300.3700 Linewidth 140.5960 Semiconductor lasers We demonstrated the highly efficient continuous wave (CW) and Q-switched infrared laser from a diode-side-pumped Nd:YAG crystal. A CW output as high as 66 W at 1319 nm was achieved under the pump power of 460 W, corresponding to a coversion efficiency of 14.3%. A maximum average power of 8.9 W of TEM00 mode was obtained in Q-switched operation at the repetition rate of 8 kHz. The performance of the laser considering the thermal lens effect induced by pump power was also analyzed.
全固态1319nm激光 Nd:YAG 侧面泵浦 热效应 140.3580 Lasers, solid-state 140.3070 Infrared and far-infrared lasers 140.3480 Lasers, diode-pumped 140.3540 Lasers, Q-switched A high-repetition-rate eye-safe optical parametric oscillator (OPO), using a non-critically phase-matched KTP crystal intracavity pumped by a passively Q-switched Nd:GdVO4/Cr4+:YAG laser, is experimentally demonstrated. The conversion efficiency for the average power is 7% from pump diode input to OPO signal output and the slope efficiency is up to 10.3%. With an incident pump power of 7.3 W, the compact intracavity OPO (IOPO) cavity, operating at 15 kHz, produces an average power of 0.57 W at 1570 nm with a pulse width as short as 6 ns. The peak power at 1570 nm is higher than 6.3 kW.
人眼安全激光 被动调Q光学参量振荡器 190.4970 Parametric oscillators and amplifiers 140.3540 Lasers, Q-switched Transmission properties of one-dimensional photonic crystals containing double-negative and single-negative materialsDownload:647次
The transmission properties of one-dimensional photonic crystals containing double-negative and single-negative materials are studied theoretically. A special kind of photonic band gap is found in this structure. This gap is invariant with scaling and insensitive to thickness fluctuation. But when changing the ratio of the thickness of two media, the width of the gap could be enlarged. The defect modes are analyzed by inducing a linear defect layer in the structure. It is found that the number of defect modes will increase when the thickness of the defect layer becomes larger.
260.1180 Crystal optics 120.7000 Transmission 230.4170 Multilayers Ytterbium-doped yttrium oxysulfide (Yb:Y2O2S) has been synthesized by solid-state reaction with sulfide flux. Diffuse reflection and emission spectra have been measured in order to determine the crystal field splitting of Yb3+ ion in the YOS lattice. According to the crystal-field levels probed in the spectra, the crystal field splitting of 2G7/2 manifold of Yb3+ ion in YOS is 709 cm-1, which is large enough for the quasi-three-level laser operation of Yb3+ ion. Emission peak position, width, full-width at half maximum (FWHM), and normalized intensity of Yb:YOS are fitted from its emission spectrum. For comparison, relevant data of 5.4 at.-% Yb:YAG is also provided.
稀土硫氧化物 发射光谱 漫反射光谱 晶场分裂 160.3380 Laser materials 160.4760 Optical properties 300.2140 Emission Nonlinear optical properties of stimulated Brillouin scattering (SBS) to signal detection in water are analyzed. With the threshold characteristics, SBS only occurs when the high power laser is focused in the SBS cell. When there is an object present in front of the focus, it leads to lower incident intensity and then SBS does not occur. The backward SBS signal depends on the focusing location. The nonlinear optical properties of SBS process in the focusing regime are analyzed theoretically. With the object coming near to the focusing center, the backward Stokes signal rises up from zero to a maximum, and then grows to saturation. The delay time of the echo signal to pump signal can give the object location. In experiment, the peak position of varying rate of energy can give object location.
激光雷达 非线性光学器件 受激散射 可见光激光 010.3640 Lidar 190.5890 Scattering, stimulated 140.3580 Lasers, solid-state 140.7300 Visible lasers We experimentally demonstrate amplitude squeezed soliton utilizing intensity-dependent self-phase modulation in an asymmetric Sagnac interferometer. The system, whose components are connected via ferrule connector/physical connection (FC/PC) fiber connectors, constitutes all-fiber configuration to generate squeezed soliton. Soliton amplitude reduction measured by homodyne detection is near 4.0 dB below the shot-noise level. Optimal squeezing fields in both simple and compact all-fiber configuration are obtained.
光孤子 压缩态 零拍探测 270.6570 Squeezed states 190.5530 Pulse propagation and temporal solitons 190.4370 Nonlinear optics, fibers By the 90 deg. elastic light scattering investigation and far field observation in the range of 20-800 centigrade, the relation between behavior of light scattering anomalies and evolution of nanodomain structures in lattice of barium sodium niobate (Ba2NaNb5O15, BSN) crystal was clarified. The correlation between anomalies on the temperature curves of the elastic light scattering intensity and temperature transformations of nanodomains was studied by X-ray and electron microscope methods. Phase transition near 500 centigrade and movement in field of scattering light could be explained by appearance of a new incommensurate phase.
非线性光学 材料 散射 190.4400 Nonlinear optics, materials 290.5870 Scattering, Rayleigh A novel lens system with correction of secondary spectrum without using anomalous glasses is presented. The lens system comprises four separated lens components, with three of them being subapertures. Two examples of apochromatic telescope are presented, both with the use of typical normal glasses, namely crown K9 and flint F5 glasses, and low-cost slightly anomalous dispersion glasses. Secondary spectrum and other chromatic aberrations of the two design examples are corrected.
复消色差透镜 二级光谱 望远镜 非异常色散玻璃 220.3620 Lens system design 080.1010 Aberrations (global) 110.6770 Telescopes 160.2750 Glass and other amorphous materials Novel optical lithography using silver superlensDownload:755次
This work has demonstrated that with silver superlens, the resolution of conventional optical lithography can be improved significantly. Experimental and simulative results are given to verify the facts that the resolution and the pattern fidelity are sensitive to the contact tightness between layers.
光刻技术 银膜超级透镜 PMMA 220.3740 Lithography 080.3630 Lenses Enhancement of light extraction in a GaInN light-emitting diode (LED) employing an omni-directional reflector (ODR) consisting of GaN, SnO2 nanorod and an Ag layer was presented. The ODR comprises a transparent, quarterwave layer of SnO2 nanorod claded by silver and serves as an ohmic contact to p-type GaN. Transparent SnO2 sols were obtained by sol-gel method from SnCl 2H2O, and SnO2 thin films were prepared by dip-coating technique. The average size of the spherical SnO2 particles obtained is 200 nm. The refractive index of the nanorod SnO2 film layer is 2.01. The GaInN LEDs with GaN/SnO2/Ag ODR show a lower forward voltage. This was attributed to the enhanced reflectivity of the ODR that employs the nanorod SnO2 film layer. Experimental results show that ODR-LEDs have lower optical losses and higher extraction efficiency as compared to conventional LEDs with Ni/Au contacts and conventional LEDs employing a distributed Bragg reflector (DBR).
发光二极管 全方位反射器 230.3670 Light-emitting diodes 310.6860 Thin films, optical properties Formation mechanism of ethanol-water excimerDownload:823次
The fluorescent spectrum and the excitation spectrum were used to present the cluster molecular structure feature in ethanol-water solutions. Through analyzing the fluorescent characteristics of an excimer, it is proposed that the excimers are formed between the ethanol-water cluster molecules in the excited state and in the ground state. The fluorescent lifetime and the fluorescent intensity decay process give information about the photo-physical and photo-chemical processes of the formation and the dissociation of an excimer. The theoretical calculation and physical analysis coincide with the experimental results. The preliminary conclusion about the structure feature of ethanol-water cluster molecule is that it has a planar one like a sandwich.
荧光光谱 荧光寿命 激基缔合物 乙醇-水团簇 300.6280 Spectroscopy, fluorescence and luminescence 300.6500 Spectroscopy, time-resolved 300.6540 Spectroscopy, ultraviolet Based on the Rytov approximation of light propagation in weak turbulent atmosphere, the closed-form expressions of field and average irradiance of each one of the four fundamental families of Helmholtz-Gauss (HzG) beams: cosine-Gauss beams, stationary Mathieu-Gauss beams, stationary parabolic-Gauss beams, and Bessel-Gauss beams, which are propagating in weak turbulent atmosphere, are obtained. The results show that the field and average irradiance can be written as the product of four factors: complex amplitude depending on the z-coordinate only, a Gaussian beam, a factor of complex phase perturbation induced by atmospheric turbulence, and a complex scaled version of the transverse shape of the non-diffracting beam. The effect of weak atmospheric turbulence on irradiance distribution of the HzG beam can be ignored.
大气传输 大气光学 湍流 010.1300 Atmospheric propagation 010.1290 Atmospheric optics 010.1330 Atmospheric turbulence The formulas of the quantum electrodynamics have been applied to calculate the spontaneous emission rate of excited atom in dielectric microcavity. The results exhibit damping oscillating patterns which depend sensitively on the scaling parameter and geometrical structure. Compared with the case that the emitting atom is immersed in dielectric, the spontaneous emission rate is depressed obviously and the center or the mean value of the oscillations is intimately related to the real refractive index of the local position where the atom is. In order to explain this phenomenon, we utilize the closed-orbit theory to deal with the classical trajectories of the emitted photon, and extract the corresponding frequencies of the oscillations by Fourier transform. It is found that the oscillations can be represented in terms of the closed-orbits of the photon motion constrained in dielectric microcavity, thus providing another perspective on the spontaneous emission of atom sandwiched by dielectric slabs.
介质夹层微腔 自发辐射率 闭合轨道理论 零点电磁场涨落 020.0020 Atomic and molecular physics 020.4900 Oscillator strengths 070.2590 ABCD transforms 270.5580 Quantum electrodynamics It is demonstrated experimentally that the anharmonic property of the quadrupole trap can be exploited to cool trapped atoms by modulating the trap potential anisotropically. This cooling effect arises from the energy-selective removal of the most energetic trapped atoms and the thermal equilibrium of the remaining atoms. The frequency dependences of the temperature and the fraction of the atoms left in the trap after the modulation are explored. It is also demonstrated that the cooling induced by parametric resonance can also increase the phase space density of the trapped atoms.
四极阱 参量共振 激光冷却 020.0020 Atomic and molecular physics 270.0270 Quantum optics Polymer gratings based on photopolymerization for low-order distributed feedback polymer lasersDownload:549次
Novel polymer distributed feedback (DFB) gratings are fabricated based on photopolymerization to reduce lasing threshold of polymer lasers. A photopolymer formulation sensitive to 355-nm ultraviolet (UV) light is proposed for the fabrication of polymer gratings and it can be used to form polymer films by spin-coating process. A very low surface-relief depth ranging from 12.5 to about 1.0 nm has been demonstrated with a refractive-index modulation of about 0.012. The experimental results indicate that such polymer gratings have promising potentials for the fabrication of low-order DFB organic semiconductor lasers.
聚合物 分布反馈激光器 光栅 050.0050 Diffraction and gratings 220.0220 Optical design and fabrication 310.0310 Thin films 250.0250 Optoelectronics Germanium doping in silica can be used as a method for nonlinearity enhancement. Properties of the enhanced nonlinearity in photonic crystal fiber (PCF) with a GeO2-doped core are investigated theoretically by using all-vector finite element method. Numerical result shows that the nonlinear coefficient of PCF is greatly enhanced with increasing doping concentration, furthermore, optimal radius of the doped region should be considered for the desired operating wavelength.
微结构光纤 非线性系数 掺锗 非线性折射率 060.2270 Fiber characterization 060.2400 Fiber properties 060.4370 Nonlinear optics, fibers Novel optical packet with non-return-to-zero label and duobinary carrier-suppressed return-to-zero payloadDownload:546次
A novel packet format with non-return-to-zero (NRZ) label and duobinary carrier-suppressed return-to-zero (DCS-RZ) payload is proposed for optical packet switching networks. NRZ label is followed by DCS-RZ payload with a certain guard time. The spectra of the low-rate NRZ label locate around the optical carrier frequency where some parts of the corresponding spectra of the high-rate DCS-RZ payload have been suppressed due to DCS-RZ modulation. At the switching node, the label or payload extraction can be realized simply through an optical bandpass or notch filter respectively. The feasibility of the scheme is verified by the simulation on the famous photonic design platform designed by Virtual Photonics Inc. (VPI). The effects of optical filter bandwidth on the received signal quality are discussed by analyzing bit error rate (BER) and contrast ratio performances.
光通信 光分组交换 光包 060.0060 Fiber optics and optical communications 060.2330 Fiber optics communications 060.4080 Modulation 060.4230 Multiplexing 动态信息
动态信息 丨 2024-04-19
COL Highlight (Vol. 22, Iss. 2): 主编推荐 | 经典导波与拓扑单向波间的高效转换动态信息 丨 2024-04-19
COL Highlight (Vol. 22, Iss. 1): 主编推荐 | 单片集成硅基灵活栅格MWSS为突破“容量危机”提供新策略动态信息 丨 2024-04-10
COL 封面故事 (Vol. 22, Iss. 2): 封面 |构造任意自相似类贝塞尔光束构造新方法动态信息 丨 2024-03-29
COL Highlight (Vol. 22, Iss. 2): 主编推荐 |声光调制的干涉增强效应,助力光学量子信息技术动态信息 丨 2024-03-25
COL 封面故事 (Vol. 22, Iss. 1): 基于时空耦合效应的超宽带频率转换技术激光评论微信公众号
点击菜单“联系编辑”即可添加期刊编辑为好友啦